Pixus releases modular VITA 48.4 card guides

Pixus releases modular VITA 48.4 card guides

Pixus has released modular liquid-cooled card guides for OpenVPX chassis. The VITA 48.4 guides allow test configurations combining different cooling approaches. Existing chassis support and the new guide hardware must not be confused.


IN Brief:

  • Pixus released modular card guides for testing 6U VITA 48.4 liquid-flow-through modules in OpenVPX development enclosures.
  • The guides can sit beside VITA 48.2 conduction-cooled or VITA 48.1 air-cooled slots using suitable chassis configurations.
  • The announcement does not give measured cooling capacity or a new complete-chassis specification; earlier Pixus documents described LFT options.

Pixus Technologies has released modular VITA 48.4 liquid-flow-through (LFT) card guides for use in open-frame OpenVPX development and test chassis. The guides, announced on 16 November, are intended to accommodate liquid-cooled plug-in modules alongside slots using other VITA cooling methods. Pixus already supplies open-frame development chassis, to which the modular guide hardware can now be added.

Liquid-flow-through modules conduct heat into a coolant circuit through structures associated with the electronics card. This differs from designs that rely on circulating air or transferring heat into a chassis wall. During development, the module must still mate correctly with its electrical backplane, while the liquid circuit needs appropriate mechanical alignment and connections. The guide arrangement addresses the card installation and test configuration rather than providing a complete cooling plant.

ANSI/VITA 48.4 sets mechanical requirements for 6U VPX liquid-flow-through modules and their interface to suitable sub-racks. It covers matters including outline, mounting and the locations needed for fluid connections. Quick-disconnect couplings are used with the chassis coolant manifold. The standard therefore provides mechanical interchangeability requirements, not an assurance that two modules drawing different power levels will run at identical temperatures.

Pixus says the guides can be incorporated into chassis alongside VITA 48.2 conduction-cooled slots or VITA 48.1 air-cooled slots. The choice allows a development enclosure to accommodate modules with different cooling interfaces during integration work. It does not mean that an air-cooled module can be converted into a liquid-cooled design merely by changing the guide, since its thermal structure and connections remain different.

Open-frame enclosures give developers access to boards, connectors and test points during hardware bring-up, firmware checks and electrical fault finding. A card may need to be repositioned as the backplane configuration changes, particularly when timing, high-speed data connections or power distribution are being investigated. The open arrangement is a laboratory convenience; the final deployed enclosure still has to meet the environmental, mechanical and safety requirements of the application.

The guides are intended for use with different OpenVPX and Sensor Open Systems Architecture (SOSA) aligned backplane configurations. OpenVPX specifies mechanical and electrical module arrangements, while SOSA alignment constrains configurations to support interoperable embedded systems. An enclosure used for development therefore has to provide the relevant slot geometry as well as the electrical interconnects specified by the boards under examination.

A liquid-cooled test setup also needs an external fluid supply, coolant distribution and a way of rejecting the heat that the modules transfer into the liquid. Pump characteristics, pressure losses, flow rate and coolant temperature must match the chosen assemblies. The November release provides no new figure for cooling capacity, thermal resistance or sustained operating power, so the card guides alone cannot be assigned an independent system cooling-performance rating.

The mechanical differences between VITA cooling approaches affect how a mixed test population is assembled. In an air-cooled board, moving air is central to heat removal; in a conduction-cooled design, contact surfaces transfer heat towards the enclosure. Liquid-flow-through cards provide an alternative thermal path but require fluid interfaces and leak management. Testing these arrangements in one development environment may help identify integration constraints before a production enclosure is selected.

Pixus also says the modular guides could be used in forthcoming VITA 100 enclosures. The statement concerns prospective compatibility with a different generation of enclosure hardware; it does not identify a newly launched VITA 100 chassis. The current product is the set of LFT guides for development hardware, and the announcement provides no separate validation results for a completed VITA 100 implementation.

Earlier Pixus documentation already listed LFT options for open-frame chassis. The 16 November release identifies the modular card guides and their combination with VITA 48.1 and 48.2 slot arrangements. No new price, shipping schedule or cooling benchmark has been supplied, and any evaluation will depend on the backplane and test modules selected.

Integration tests can establish whether the card guides, backplane, coolant connections and mixed module population can be assembled as required. Thermal qualification still calls for measured coolant and module temperatures under representative loads, along with checks of mechanical fit and fluid connections. Pixus’s 16 November development adds a modular test hardware option rather than a newly characterised liquid-cooling system.


Stories for you


  • Pixus releases modular VITA 48.4 card guides

    Pixus releases modular VITA 48.4 card guides

    Pixus has released modular liquid-cooled card guides for OpenVPX chassis. The VITA 48.4 guides allow test configurations combining different cooling approaches. Existing chassis support and the new guide hardware must not be confused.


  • AstraNu raises $3.5m for chip-scale OCT engine

    AstraNu raises $3.5m for chip-scale OCT engine

    AstraNu has raised funding for compact medical optical imaging development. The $3.5m round will support chip-scale swept-source OCT testing with partners and manufacturing preparation. Commercial production and clinical approvals have not been announced.