Murata integrates processing into industrial motion sensors

Murata integrates processing into industrial motion sensors

Murata has introduced two integrated inertial sensors for industrial applications. The SCI36LT-K01 performs orientation calculations using embedded sensor fusion, while the K02 allows customer software to run on its Cortex-M4 processor.


IN Brief:

  • Murata's SCI36LT family combines three-axis gyroscope and accelerometer sensing with an 80 MHz Arm Cortex-M4 microcontroller.
  • The K01 provides embedded orientation calculations, while the K02 supports customer firmware and additional CAN integration options.
  • Samples are available, with production scheduled for the first quarter of 2027.

Murata Manufacturing has introduced an industrial inertial measurement unit family combining six-axis MEMS sensing and embedded processing in a surface-mount package, allowing selected motion calculations to be performed within the sensor rather than by an external controller.

The SCI36LT series comprises two devices built around a common sensing and processing architecture. The SCI36LT-K01 includes Murata’s proprietary orientation algorithm, while the SCI36LT-K02 allows customers to program the embedded microcontroller for their own measurement and processing requirements.

Both versions incorporate a three-axis gyroscope, three-axis accelerometer, and 80 MHz Arm Cortex-M4 microcontroller with 256 KB of flash memory and 64 KB of SRAM. Supporting electronics, passive components, a crystal resonator, and voltage regulation are integrated within an LGA package measuring 11.2 × 9.2 × 2.9 mm.

The architecture reduces the number of separate components needed to construct an inertial sensing module. It also gives equipment manufacturers a choice between a device that produces calculated orientation information and one that provides programmable processing resources alongside the underlying sensor measurements.

Inertial measurement units measure movement through two different physical quantities. Gyroscopes detect angular velocity around the sensor axes, while accelerometers measure acceleration, including the effect of gravity when interpreted under suitable operating conditions.

Those outputs do not directly provide a complete, drift-free estimate of orientation. Angular velocity can be integrated to estimate changes in position, but small measurement errors accumulate over time. Accelerometer measurements can provide an inclination reference from the direction of gravity, although movement and vibration introduce acceleration that can complicate the calculation.

Sensor fusion algorithms combine these measurements to improve the resulting estimate. Their behaviour depends on assumptions about the sensor noise, expected movement, and the relative confidence assigned to different sources of information.

The SCI36LT-K01 uses an extended Kalman filter to calculate pitch, roll, and relative yaw. The filter combines a model of the system’s changing state with incoming measurements, updating its estimate as additional information becomes available.

Murata provides the resulting orientation as Euler angles or a direction cosine matrix. Euler angles describe rotations through a set of angular coordinates, while a direction cosine matrix represents the orientation relationship between two coordinate systems.

The choice of output format affects how orientation information can be used by external software. A controller that performs coordinate transformations may benefit from matrix information, while a simpler monitoring application may be able to work directly with pitch and roll measurements.

Murata specifies nominal inclination accuracy of 0.1 degrees for the K01. That figure is a manufacturer specification and does not establish the accuracy attainable in every machine, particularly where vibration, dynamic acceleration, temperature conditions, or installation errors differ from the relevant measurement assumptions.

The distinction between relative yaw and an absolute heading reference is also important. A six-axis inertial sensor can estimate changes in orientation, but it does not independently determine a fixed geographic heading in the way that a suitable external directional reference can.

Calibration functions are included in the K01 to support adjustments after integration into a printed circuit board or module. They are intended to simplify compensation for installation-related effects, reducing the amount of separate host software required to prepare the device for its intended application.

Murata also allows the filter parameters and output data rates to be adjusted. An excavator monitoring the inclination of its working equipment has different movement characteristics from a fast-moving robotic mechanism, making the expected motion profile relevant to sensor processing.

The SCI36LT-K02 retains the same fundamental MEMS and Cortex-M4 architecture but omits Murata’s proprietary sensor fusion algorithm. Instead, customers can load their own software onto the embedded processor, allowing application-specific calculations to be performed close to the sensing element.

Potential uses include specialised filtering, processing of vibration or movement patterns, and preparing measurement information before it is transmitted to a machine controller. The available flash, SRAM, and processing capacity determine the complexity of algorithms that can run within the device.

Murata supplies example firmware and source code for basic sensor communication and status monitoring. Both devices support SPI and UART interfaces, while the K02 additionally provides CAN support. The precise external interface implementation must be considered during system integration.

Moving calculations into the sensor can reduce the processing workload assigned to the host processor. It does not remove the need for external computing where a machine combines inertial information with cameras, positioning receivers, encoders, or other control signals.

Both SCI36LT variants have a gyroscope measurement range of ±490 degrees per second and an accelerometer range of ±16 g. Their specified supply range is 3.1 V to 5.5 V, with operation from −40°C to +85°C.

Those limits determine the conditions within which the sensor is intended to operate. Movement exceeding the specified measurement range can cause saturation, while the performance of the completed system also depends on mechanical mounting, environmental exposure, and the behaviour of the surrounding electronics.

More than 200 internal monitoring signals support the devices’ self-diagnostic functions. Diagnostic information can help identify particular faults or abnormal operating conditions, although its presence does not independently establish compliance with a functional safety standard for the completed machine.

Murata is targeting construction and agricultural machinery, industrial robots, humanoid systems, commercial drones, surveying equipment, and other applications requiring movement and orientation measurements. Heavy machinery grade control and robotic posture monitoring are among the stated use cases.

The company intends to build further application-specific products on the common SCI36LT architecture, potentially combining different processing algorithms and calibration arrangements. That development remains separate from the specifications established for the first two devices.

Samples of the SCI36LT-K01 and SCI36LT-K02 are available, with mass production scheduled for the first quarter of 2027. The immediate design choice is between Murata’s integrated orientation processing and the programmable K02, with both using the same compact MEMS and microcontroller platform.


Stories for you


  • Murata integrates processing into industrial motion sensors

    Murata integrates processing into industrial motion sensors

    Murata has introduced two integrated inertial sensors for industrial applications. The SCI36LT-K01 performs orientation calculations using embedded sensor fusion, while the K02 allows customer software to run on its Cortex-M4 processor.


  • LITEON details 72 kW AI rack power shelf

    LITEON details 72 kW AI rack power shelf

    LITEON has detailed additional power hardware for dense AI racks. Its electronica portfolio includes a 72 kW, 1U shelf, established 110 kW equipment, capacitor backup, and 800 V DC distribution concepts.