Imec and ASRA set automotive chiplet requirements

Imec and ASRA set automotive chiplet requirements

Imec and ASRA have published interoperable automotive chiplet architecture requirements. The ACIR framework covers die-to-die communication, boot sequencing, power management, and functional safety, without prescribing how individual semiconductor vendors must implement those functions.


IN Brief:

  • Imec and Japan's ASRA have published common architectural requirements for automotive chiplet interoperability.
  • ACIR addresses system management, error reporting, boot sequencing, power control, and functional safety.
  • The first specification is open for industry feedback, with implementation and qualification work still required.

Imec and Japan’s Advanced SoC Research for Automotive (ASRA) have published common architectural requirements for automotive chiplets, establishing a framework for combining semiconductor dies developed by different suppliers into integrated computing systems.

The Automotive Chiplet Interoperability Requirement (ACIR) document was introduced at the Autonomous Edge Chiplet Forum in Japan on 12 November. Developed by imec’s Autonomous Edge Chiplet Program and ASRA, it covers error and system management, boot sequencing, power management, functional safety, and die-to-die interoperability. Its first edition is publicly available for industry feedback.

Automotive computing architectures are becoming more complex as advanced driver assistance, automated driving, and intelligent cockpit systems demand greater processing capability. These applications combine general-purpose computing, AI acceleration, sensor processing, and real-time control, often with different requirements for computational performance, power consumption, and operational safety.

Traditionally, many of these functions have been integrated into monolithic systems-on-chip. As complexity increases, however, combining every function within a single semiconductor die can lengthen development programmes, complicate verification, and restrict the manufacturing processes available for different circuit blocks.

Chiplet architectures provide an alternative by dividing the system into smaller semiconductor dies that can be developed and manufactured separately before being assembled into a common package. A processor, accelerator, or specialist interface can potentially use a manufacturing process selected for its particular requirements rather than being constrained by the process used for the remainder of the system.

That flexibility introduces new integration challenges. Semiconductor dies from different suppliers must communicate through compatible physical and logical interfaces, but a working system also needs coordinated initialisation, power control, fault detection, and recovery behaviour. Compatibility at the electrical interface does not establish that the assembled computing system will behave predictably under every operating condition.

ACIR addresses these broader system requirements. It establishes common architectural expectations for independently developed chiplets without requiring every supplier to adopt an identical internal implementation. The document complements existing chiplet standards and concentrates on the functions needed to make independently developed components operate within the same automotive computing architecture.

Die-to-die communication is one part of the framework. The integrated system must establish connections between components whose internal processing architectures and interface implementations may differ. Aligning their communication requirements provides a foundation for exchanging information, although signal integrity, package design, timing, and protocol verification remain necessary during physical implementation.

Boot sequencing presents a separate challenge. A multichip system may contain processing devices, accelerators, and interfaces with different power domains and initialisation dependencies. Those components must enter defined operating states before higher-level software can rely on their availability. Inconsistent sequencing could leave part of the system operating while a dependent component remains unavailable.

Power management requires similar coordination. Individual dies may support different voltage requirements and operating states, including reduced-power modes and controlled shutdown. Their behaviour must be managed as part of the complete system, particularly where one component depends on information or services provided by another.

The functional safety provisions address fault recognition and reporting between chiplets. In an automotive application, a failure within one processing device may affect functions implemented elsewhere in the system. ACIR defines a common error reporting infrastructure intended to support predictable decisions when faults occur.

That does not remove the need for application-specific safety engineering. Automotive equipment must still be assessed against the hazards, operating conditions, and functional safety requirements of the completed system. A common reporting architecture supports this work but cannot independently demonstrate that a particular semiconductor assembly satisfies a required safety integrity target.

Manufacturing and packaging reliability also remain important. Chiplets must be connected through dense interconnect structures while operating under electrical and thermal conditions that can vary considerably during vehicle operation. Die placement, interconnect reliability, package materials, and heat removal influence the long-term performance of the assembled device.

Imec’s broader autonomous edge chiplet activities include research into reference architectures and physical integration technologies. These provide a route for investigating the engineering requirements associated with chiplet assembly, while ACIR concentrates on the architectural behaviour that independently developed components must support.

The collaboration brings together two established automotive semiconductor research ecosystems. ASRA was formed in Japan in 2023 and includes vehicle manufacturers, automotive suppliers, and semiconductor companies. Its members include Honda, Mazda, Nissan, Subaru, Suzuki, Toyota, Denso, Renesas, and Socionext.

Imec’s programme contributes semiconductor research and international industrial partnerships. The organisations established their strategic alignment on automotive chiplet architectures in 2025, with the latest document translating that cooperation into a common technical reference.

The requirements could also influence procurement and system specification. Vehicle manufacturers and major automotive suppliers may use a common architectural baseline when discussing chiplet integration with semiconductor vendors, reducing the need to define every system-level requirement independently for each development programme.

Commercial interoperability will nevertheless depend on the behaviour of actual devices. Suppliers must implement compatible interfaces, demonstrate coordinated system management, and complete the verification required for their intended applications. The published requirements do not establish that a complete multivendor automotive chiplet platform has entered qualified production.

ACIR’s first edition is available for review and technical feedback. Subsequent engineering activity will determine how the common requirements are implemented, tested, and incorporated into automotive computing platforms assembled from independently developed semiconductor components.


Stories for you


  • Murata integrates processing into industrial motion sensors

    Murata integrates processing into industrial motion sensors

    Murata has introduced two integrated inertial sensors for industrial applications. The SCI36LT-K01 performs orientation calculations using embedded sensor fusion, while the K02 allows customer software to run on its Cortex-M4 processor.


  • LITEON details 72 kW AI rack power shelf

    LITEON details 72 kW AI rack power shelf

    LITEON has detailed additional power hardware for dense AI racks. Its electronica portfolio includes a 72 kW, 1U shelf, established 110 kW equipment, capacitor backup, and 800 V DC distribution concepts.