IN Brief:
- Iridium has activated NTN Direct, a satellite connectivity service for compatible standards-based NB-IoT devices.
- Nordic Semiconductor’s nRF9151 is the first certified module; a public enabling firmware update is planned for January 2027.
- The satellite constellation offers worldwide geographical reach, but commercial access remains dependent on national rules and service providers.
Iridium Communications has activated its NTN Direct satellite service for compatible narrowband Internet of Things (NB-IoT) devices. Operating over the company’s existing low Earth orbit constellation, the service is intended to extend standards-based connectivity beyond terrestrial mobile coverage. Iridium describes worldwide geographical reach, although the provision and use of the service in individual countries remains subject to regulation and provider arrangements.
The system uses a 3GPP standards-based approach to non-terrestrial communications, giving chipset suppliers and equipment developers a common framework for satellite NB-IoT integration. Compatibility still depends on suitable radio hardware, firmware, antenna design and service provisioning. Ordinary mobile handsets and existing cellular sensors do not acquire satellite access merely because the network has been activated.
Iridium’s operational constellation uses coordinated L-band spectrum. Satellite communication introduces different link conditions from a terrestrial mobile network, including changing distance and geometry between a moving spacecraft and an endpoint. Antenna placement, permitted transmit power and the timing of transmissions all influence the reliability and energy consumption of a device. The company has not established a universal battery-life, data-rate or latency figure for every implementation.
The service is intended primarily for small amounts of data and signalling, with applications including remote asset monitoring, industrial equipment status, logistics, connected vehicles, utility metering and livestock tracking. Narrowband connectivity can be suitable for an occasional sensor reading, position update or alert without carrying the traffic volumes associated with cameras or broadband mobile devices. Actual message frequency and energy use depend on the module implementation, radio conditions and the duty cycle selected by the equipment designer.
Nordic Semiconductor’s nRF9151 has been certified as the first module for NTN Direct. A public firmware update is planned for January 2027 to allow existing nRF9151-based equipment to support the service without necessarily replacing the module. The update has not yet been released, and device manufacturers will still need to assess firmware compatibility, antenna performance and service access for their particular products.
The activation follows earlier ecosystem work. A September demonstration involving Iridium, Deutsche Telekom IoT and Toyota used a Nordic nRF9151 development board to send satellite messages from a vehicle. Altair Semiconductor subsequently described NTN Direct integration in its ALT1350 and ALT1550 chipsets, covered separately by IN Electronics in October. The present milestone is the activation of the service, rather than another chipset integration.
Livestock tracking supplier Nofence is working to integrate NTN Direct into its N3 collars. The intention is to maintain an NB-IoT communications route across remote grazing areas where terrestrial service is absent. The companies have not provided a measured collar battery-life result, message-delivery time or deployment count. Those outcomes depend on how often a collar transmits, its radio conditions and the approved service configuration.
A combined terrestrial and satellite product needs to determine when to use each network, how to queue messages during interruptions and when to retry a failed transmission. Frequent attachment attempts can use more energy than infrequent status reporting, particularly in devices intended to remain unattended for long periods. A standards-based modem reduces some protocol integration work, but the final power budget and software behaviour remain product-design decisions.
Iridium names Altair Semiconductor, Deutsche Telekom IoT, Mlink Technology and Vodafone IoT among organisations working on additional integrations and commercial adoption. The existence of those partnerships does not indicate that each partner has launched a production service in every territory. Iridium explicitly says initial availability will vary and that provision and use are subject to applicable laws, regulations and provider conditions, despite the constellation’s advertised global reach.
Iridium is working with Altair Semiconductor, Deutsche Telekom IoT, Mlink Technology and Vodafone IoT on further integrations. Nordic’s planned January 2027 firmware release is a defined next step for one certified hardware platform, while other manufacturers will follow their own qualification schedules. NTN Direct is now activated at constellation level; the availability of a working connection for any particular device will depend on its implementation and the permissions governing the service.



