IN Brief:
- EXA Scale QX extends the V93000 platform to four card cages and 36 instrument slots.
- XHC32 and XHD interface options can double channel count and current delivery per pogo block.
- The architecture maintains compatibility with existing EXA Scale instruments and external test equipment.
Advantest has introduced a four-card-cage test head for its V93000 EXA Scale platform, increasing the available instrument capacity for testing advanced processors and other semiconductors with demanding power and connection requirements.
The EXA Scale QX provides 36 instrument slots and extends the platform’s modular architecture beyond its existing one-, two-, and three-card-cage configurations.
The system targets high-power, high-pin-count devices used in artificial intelligence and high-performance computing, where the number of electrical connections and the current required during testing can place substantial demands on automated test equipment.
Semiconductor test systems apply controlled electrical signals and operating conditions to a device, then measure its responses against defined acceptance limits. The tests can involve functional behaviour, signal timing, voltage and current measurements, and operation across different supply conditions.
Advanced processors combine numerous interfaces, internal computing functions, and power domains. Their complexity can increase the number of tester channels required and the amount of equipment needed to reproduce relevant operating conditions.
The V93000 EXA Scale platform accommodates different test instruments within a common system architecture. Its modular design allows the available hardware to be configured according to the requirements of the devices being tested.
The QX increases the number of instrument slots available within that architecture. Advantest’s EXA Scale CX has one card cage, the SX has two, and the LX has three, while the new QX introduces a fourth.
The additional capacity allows a greater number of supported instruments to be installed within a single test head.
Instrument slots and test channels are different measurements. The number of channels available to a test programme depends on the instruments fitted, their electrical capabilities, and the interface connecting the tester to the semiconductor.
Increasing slot capacity therefore provides additional configuration options rather than a fixed increase in channel count for every installation.
Advantest has also expanded the electrical interface available with the QX. When configured with the XHC32 double-current pogo cable and Xtreme High Density pogo blocks, the arrangement can double the number of channels and the current available per pogo block.
Pogo connections use spring-loaded contacts to establish electrical connections between the test system and the interface associated with the device under test.
They support repeated contact during semiconductor testing, but reliable operation depends on contact alignment, mechanical condition, connection resistance, and appropriate electrical design.
Higher contact density can accommodate more connections within a defined physical area. The resulting interface must still maintain suitable signal quality and withstand the currents required by the test programme.
Power delivery is particularly demanding when testing complex processors. Multiple supply rails may need to operate at different voltages, with substantial changes in current as the device moves between operating states.
Voltage disturbances introduced by the supply equipment or its connections can affect test results. The test system must therefore manage power delivery alongside the measurement and control functions used to evaluate the device.
Electrical resistance and parasitic inductance within cables and contacts influence the behaviour of the supply network. Rapid changes in current can produce transient voltage deviations, making the arrangement of the tester interface important.
Advantest’s expanded interface provides additional current capability, although the amount delivered to an individual device will depend on the installed instruments and the complete test configuration.
The QX also preserves compatibility with the existing EXA Scale architecture, including its instruments, card cages, backplanes, and system control arrangements.
Advantest states that the new test head has dimensions nearly identical to those of the EXA Scale LX. This allows compatibility with external equipment such as wafer probers, final test handlers, and die-level probing systems.
Maintaining these mechanical interfaces can reduce the changes needed when adding test capacity to an established manufacturing environment.
However, compatibility with surrounding equipment does not remove the need to validate the test programme. Changes in instrumentation, power delivery, or electrical connections can require correlation testing before a configuration enters production.
Semiconductor manufacturers need consistent results across test systems. A device should not pass or fail merely because the programme has moved between two supported equipment configurations.
Test correlation therefore involves checking the electrical measurements, operating conditions, timing, and acceptance limits used by each system.
The greater complexity of AI processors also increases pressure on test duration. More connections and test functions can require additional measurement steps, while production facilities must maintain sufficient throughput.
Providing additional hardware resources may allow more demanding programmes to be executed, but the QX announcement does not establish a universal reduction in test time.
Throughput depends on the individual device, the structure of the programme, the instruments installed, and how effectively test operations can be performed concurrently.
Advantest will demonstrate the EXA Scale QX at SEMICON Japan, taking place from 9 to 11 December 2026 at Tokyo Big Sight.
The company has not disclosed a general production throughput improvement or a confirmed delivery timetable applicable to every customer configuration.
EXA Scale QX extends an established semiconductor test architecture with greater instrument capacity and a denser electrical interface. Its operating benefit will be determined by the test resources required for individual devices and the extent to which existing equipment can be retained during implementation.



