IN Brief:
- HARTING has developed an adapter for installing Han-Modular Domino Cubes in Han 3A housings.
- Compatible modules provide power, signal, data, and pneumatic connection options within a compact assembly.
- Housing variants cover protection ratings from IP54 to IP69K, with RearFit installation available.
HARTING has introduced the Han 3A Domino Adapter, allowing selected Han-Modular Domino connection modules to be installed in compact Han 3A connector housings. The development extends the company’s modular connector system into smaller mechanical formats, providing additional options for combining power, data, signal, and pneumatic connections within industrial equipment.
The adapter is identified by part numbers 97000006077 and 97000006078. It accommodates Domino Cubes within the Han 3A housing format, extending a modular system previously used in larger standard size B housings. HARTING describes the resulting assembly as the smallest modular connector frame currently available in the industrial sector.
The reduced size addresses a recurring mechanical constraint in equipment design. Industrial control systems, robotic equipment, and distributed machinery frequently require several electrical and communication connections within a limited area. Separate connectors can occupy substantial panel space and increase the number of cable termination points needed during assembly.
Modular connectors allow compatible connection functions to be combined within one housing. Instead of allocating a different external interface to every circuit, engineers can select modules suited to the intended electrical or pneumatic functions and incorporate them into a common mechanical arrangement.
HARTING’s Domino system takes this approach further by using smaller modular elements known as Domino Cubes. According to the company, the modular construction doubles the possible combinations of connection types, transmission media, and power ratings within a given area compared with its earlier arrangements.
The Han 3A adapter extends those combinations into a smaller housing rather than introducing a new transmission protocol or electrical connector standard. Its performance consequently depends on the individual Domino modules selected for the completed assembly.
Compatible modules include options for power circuits, signals, data transmission, and compressed air. This enables different connection technologies to be combined according to the equipment’s requirements, although the manufacturer does not provide one universal electrical rating covering every possible combination.
Data connections form an important part of the new adapter’s intended use. HARTING identifies Category 5 and Category 6A transmission classes, with compatible interfaces including RJ45, M12, and USB-C. The applicable speed and transmission characteristics depend on the selected module and the complete cabling arrangement.
High-speed data connections require suitable impedance control, contact geometry, shielding, and cable termination. Installing a data module in a smaller housing does not independently establish the transmission performance of the complete assembly, particularly where multiple electrical functions are routed through the same connector.
The adapter is compatible with several established HARTING housing systems. These include Han M, Han HPR, and Han Inox variants, together with Han-Yellock 10 and the HARTING ICC 20 series. The available configurations provide different choices of housing material, mechanical construction, and environmental protection.
HARTING identifies enclosure protection ratings ranging from IP54 to IP69K across the compatible housing options. These classifications apply to suitable completed connector assemblies and should not be interpreted as an IP69K rating for every adapter configuration.
Selecting a suitable housing remains an equipment-level decision. An installation exposed to water, dust, cleaning chemicals, or mechanical vibration may require different materials, seals, locking arrangements, and cable entry components from equipment installed inside a protected enclosure.
The company also identifies compact temperature measurement connections as an application. Suitable Domino modules can accommodate Type J and Type K thermocouple contacts, allowing analogue temperature signals to be incorporated into a modular connector arrangement.
Thermocouple measurement depends on maintaining the appropriate contact materials and electrical characteristics throughout the measurement circuit. Connector selection must therefore account for the sensor type, wiring, and measurement accuracy required by the application, rather than relying on mechanical compatibility alone.
Assembly features include largely tool-free installation and the option of RearFit mounting. Rear-access fitting can simplify installation where the front of the housing or equipment panel is difficult to reach, although the actual assembly procedure depends on the chosen modules and housing components.
The compact format may also help manufacturers standardise the mechanical interfaces used across different equipment variants. A common housing size can accommodate different connection functions where the modules and mating arrangements are compatible, potentially reducing the number of separate enclosure designs required.
Such flexibility does not remove the need for individual connector validation. Current carrying capacity, voltage ratings, insulation, signal integrity, mechanical retention, and environmental sealing remain dependent on the complete configuration.
HARTING has made the adapter available as part of its existing Han-Modular product system. The immediate development is the ability to integrate compatible modular functions into Han 3A-sized housings, offering another mechanical option for equipment designs with restricted connector space.



