Infineon and Megmeet advance 800V AI power

Infineon and Megmeet advance 800V AI power

Infineon and Megmeet are extending power conversion for AI infrastructure. The collaboration uses second-generation CoolSiC MOSFETs in a three-phase power shelf and extends to server power supplies, intermediate bus converters, and solid-state transformers.


IN Brief:

  • Infineon and Megmeet are collaborating on 800V DC power architectures for AI data centres.
  • Megmeet has developed a three-phase AI power shelf using Infineon's second-generation CoolSiC MOSFETs.
  • Further cooperation covers server power supplies, intermediate bus converters, and solid-state transformers.

Infineon Technologies and Shenzhen Megmeet Electrical are extending their collaboration into 800V DC power architectures for AI data centres, with a three-phase power shelf incorporating second-generation CoolSiC MOSFETs forming the latest development. The companies are combining semiconductor technology with power system engineering as computing infrastructure moves towards higher power densities and more demanding electrical distribution arrangements.

Megmeet has developed the three-phase power shelf using Infineon’s CoolSiC MOSFET G2 devices. The companies report system efficiency above the peak efficiency requirements associated with the 80 PLUS Ruby benchmark, although they have not published the measurement conditions or a complete set of efficiency figures. The comparison is a manufacturer claim and does not establish that the new equipment has received independent certification.

Three-phase power supplies are increasingly relevant to data centres accommodating high-density AI computing equipment. The electrical power required by accelerators, processors, and associated infrastructure must be converted and distributed while maintaining voltage regulation under changing loads. Higher rack power ratings increase the demands placed on the conversion equipment and the conductors connecting its different stages.

Traditional lower-voltage distribution arrangements require substantial currents as power requirements increase. Raising the DC distribution voltage can reduce the current necessary to transmit a given amount of electrical power, lowering resistive losses in conductors and busbars. The relationship is particularly important because those losses increase with the square of the current.

Higher voltages introduce different engineering requirements. Switching devices, insulation, protection circuits, connectors, and maintenance procedures must be appropriate for the electrical conditions. The overall efficiency of an 800V architecture also depends on how power is converted between incoming AC supplies, DC distribution, and the lower voltages used by computing devices.

Infineon’s CoolSiC G2 devices are intended to reduce switching and conduction losses within suitable conversion circuits. Silicon carbide supports power semiconductor designs capable of operating at high voltages and switching frequencies, although the advantages achieved in practice depend on circuit topology, gate driving, operating temperature, and the design of the surrounding system.

Reducing switching losses can allow a power converter to operate more efficiently or support different choices of switching frequency and passive components. Such trade-offs must be assessed together: increasing switching frequency may reduce the size of magnetic components, for example, while introducing additional electromagnetic interference and switching-related losses.

Thermal management is equally important in densely populated power electronics. The semiconductor package must transfer heat generated within the device towards the cooling structure, while maintaining electrical and mechanical reliability through repeated operating cycles.

Infineon incorporates its .XT interconnection technology into the relevant CoolSiC devices. According to the company, this reduces thermal resistance and improves heat dissipation, supporting long-term stability. The temperature achieved in a completed power shelf will nevertheless depend on the complete thermal path, operating load, airflow, and cooling arrangements.

Rapid changes in AI accelerator utilisation place another demand on power conversion equipment. A sudden increase or reduction in electrical load requires the supply to maintain an acceptable output voltage while its control system adjusts. The performance of the semiconductor switches contributes to this response, but the overall result also depends on energy storage, feedback control, and circuit design.

Infineon and Megmeet identify stable power delivery during changing AI server workloads as an objective of their collaboration. Numerical transient response measurements have not been published for the three-phase shelf, so the announcement does not establish its performance against competing equipment under equivalent test conditions.

The programme extends beyond the current shelf design. The companies are also collaborating on server power supply units, intermediate bus converters, and solid-state transformers. These technologies occupy different stages of a power architecture, each requiring an appropriate balance of conversion efficiency, voltage regulation, protection, and physical size.

The relationship builds on previous work using Infineon’s CoolMOS 8 superjunction MOSFETs and OptiMOS 6 devices in Megmeet’s single-phase AI server power supplies. The latest project therefore moves an established component partnership into three-phase conversion and higher-voltage distribution development.

Infineon has separately developed 800V AI-rack reference designs to explore power distribution and conversion requirements. Megmeet’s equipment represents a distinct system-level application using the company’s semiconductor technology, rather than a repeat of those earlier reference designs.

The companies have not disclosed the shelf’s complete electrical ratings, commercial installation volumes, customer orders, or deployment timetable. Their next development work will extend the semiconductor collaboration across the additional conversion stages, with system-level testing required to establish the performance of each resulting configuration.


Stories for you


  • CML Micro introduces 10W C-band GaN amplifier

    CML Micro introduces 10W C-band GaN amplifier

    CML Micro has introduced a compact gallium nitride amplifier device. The MGX-445040-S5 delivers 10W saturated output power across 4.4–5.0GHz, with integrated matching and a 5 × 5mm package for demanding RF communications applications.


  • NCAB targets 15% PCB sales growth

    NCAB targets 15% PCB sales growth

    NCAB has set new growth targets for PCB operations worldwide. The Swedish group is targeting average annual net sales growth of 15%, an equivalent EBITA margin, and a net debt-to-EBITDA ratio of 1.5–2 as it continues expanding through organic growth and acquisitions.