Vishay extends high-voltage capacitor range

Vishay extends high-voltage capacitor range

Vishay has expanded its high-voltage aluminium electrolytic capacitor product range. New 550V and 600V versions of the 259 PHM-SI series provide additional options for DC bus circuits in industrial drives, energy systems, and high-power conversion equipment.


IN Brief:

  • Vishay has added 550V and 600V ratings to its 259 PHM-SI capacitor series.
  • New versions provide 330–470µF at 550V and 330–390µF at 600V, with ripple current ratings from 2.14A to 2.58A.
  • Higher voltage ratings may reduce the number of capacitors needed in series, subject to circuit design and voltage-sharing requirements.

Vishay Intertechnology has expanded its 259 PHM-SI series of snap-in aluminium electrolytic capacitors with 550V and 600V versions, increasing the available voltage ratings for industrial power conversion and high-voltage DC bus applications.

The new devices are intended for equipment including industrial motor drives, solar inverters, electric vehicle charging systems, uninterruptible power supplies, and medical instrumentation.

Vishay has introduced four configurations across the two voltage ratings. A 35 × 45mm case accommodates 330µF devices rated at either 550V or 600V, while a 35 × 55mm case provides 470µF at 550V or 390µF at 600V.

Their ripple current ratings range from 2.14A to 2.58A under the manufacturer’s specified conditions. The capacitors are designed for applications where electrical energy must be stored or filtered while substantial alternating current components pass through the DC link.

Capacitors are used within power converters to limit voltage fluctuations and provide energy during changes in operating conditions. Their required capacitance depends on the electrical load, allowable voltage ripple, and the energy that the circuit must store.

A DC bus operating at several hundred volts may require multiple capacitors to achieve the necessary electrical ratings and energy storage capacity.

Where the voltage exceeds the rating of an individual capacitor, components can be connected in series. The total applied voltage is then distributed across the devices, provided the circuit is designed to maintain suitable voltage sharing.

Series connections increase the combined voltage capability but reduce equivalent capacitance.

For example, two identical capacitors connected in series provide half the capacitance of either device. Achieving a specified bus capacitance may therefore require larger individual components or several series-connected strings.

Using capacitors with higher voltage ratings can reduce the number needed in some designs. Vishay identifies this as a way to simplify power circuits and potentially reduce board space and component costs.

The electrical benefits depend on the intended bus voltage and the margins required during normal operation and transient conditions.

Higher rated voltage does not remove the need to account for overvoltage, component tolerances, and the distribution of voltage between series-connected capacitors.

Aluminium electrolytic capacitors can exhibit differences in leakage current. When devices operate in series, those differences may cause unequal voltage sharing, potentially exposing one component to greater stress.

Balancing resistors or other arrangements can be used to improve voltage distribution. Their design introduces additional considerations involving power dissipation, component tolerances, and the expected operating conditions.

A circuit using higher-voltage capacitors may require fewer such components, but the need for voltage balancing must still be established from the final topology rather than assumed from the capacitor rating alone.

Ripple current presents a separate constraint. Alternating current flowing through a capacitor produces electrical losses associated with its equivalent series resistance, generating heat within the component.

The resulting temperature affects the capacitor’s operating life. Excessive ripple current can therefore reduce reliability even where the applied DC voltage remains below the rated limit.

The new 259 PHM-SI variants support ripple current ratings from 2.14A to 2.58A, allowing designers to select an appropriate combination of capacitance, voltage rating, and current capability.

These ratings must be interpreted using the manufacturer’s reference temperature and frequency conditions. Actual converter operation may require adjustments to account for the current waveform and surrounding thermal environment.

Vishay specifies a useful life exceeding 3,000 hours at 105°C for the series under defined conditions.

This does not mean that the capacitor must be replaced after 3,000 hours in normal operation. The useful-life rating describes endurance at a demanding reference temperature, while actual operating life depends on thermal loading, applied voltage, ripple current, and the conditions experienced by the device.

The capacitors operate across a specified temperature range from -40°C to +105°C. Their mechanical construction uses cylindrical cases and snap-in terminals designed for printed circuit board installation.

Mechanical integration is relevant to high-power assemblies because larger capacitors require suitable support, clearance, and connections capable of accommodating the electrical and environmental conditions.

The position of the capacitor bank can also influence circuit performance. Connection length and conductor geometry contribute unwanted inductance and resistance, which can affect the voltage transients experienced during switching.

Selecting the capacitor therefore involves both its stated electrical characteristics and the arrangement of the complete DC-link circuit.

The wider 259 PHM-SI series covers voltages from 200V to 600V and capacitances from 39µF to 2,200µF. Those limits apply across the family rather than to each of the newly introduced configurations.

The extended range is available in production quantities, with regional lead times of approximately 12 to 18 weeks.

The 550V and 600V additions provide further choices for high-voltage energy storage and filtering. Their practical contribution will depend on whether the higher ratings allow a simpler capacitor arrangement while meeting the required capacitance, ripple current, thermal, and reliability limits.


Stories for you


  • EPC Space expands GaN transistor packaging options

    EPC Space expands GaN transistor packaging options

    EPC Space has expanded packaging choices for radiation-tolerant GaN transistors. Its 100–200V portfolio includes plastic QFN and hermetic options, providing different electrical, mechanical, and environmental configurations for satellite power conversion and aerospace equipment.


  • Samsung expands NVIDIA partnership into MLCCs

    Samsung expands NVIDIA partnership into MLCCs

    Samsung Electro-Mechanics has extended its semiconductor partnership with NVIDIA further. The companies have amended their substrate supply agreement and broadened cooperation involving high-reliability multilayer ceramic capacitors for accelerated computing platforms.