IN Brief:
- CML Micro has introduced its first aerospace and defence-focused GaN power amplifier.
- The MGX-445040-S5 provides 40dBm saturated output power, 13dB small-signal gain, and a manufacturer-rated 55% power-added efficiency at P3dB.
- Its GaN-on-SiC construction and integrated matching target compact MANET radios, UAV data links, and other C-band systems.
CML Micro has introduced the MGX-445040-S5, a 10W gallium nitride power amplifier designed for C-band radio systems operating between 4.4GHz and 5.0GHz. The UK semiconductor developer is targeting aerospace and defence communications, including mobile ad hoc networks, portable radios, and uncrewed aircraft data links.
The single-stage device delivers saturated output power of 40dBm, equivalent to 10W, with a small-signal gain of 13dB. CML also specifies power-added efficiency of 55% at the 3dB gain-compression point, providing an indication of its performance when driven towards the upper part of its operating range.
The amplifier is manufactured using gallium nitride on silicon carbide technology and supplied in a 5 × 5mm plastic air-cavity QFN package. Its compact dimensions allow the RF output stage to occupy relatively little board area, although the complete circuit still requires power conditioning, thermal management, transmission lines, and other supporting components.
Gallium nitride has become an important semiconductor material for RF power applications because its physical properties support high electric fields and high-frequency operation. A silicon carbide substrate provides a useful combination of thermal characteristics and compatibility with high-power GaN device structures.
The material system allows designers to develop relatively compact power amplifiers, but its benefits depend on the electrical and thermal conditions in which the devices operate. High output power density concentrates heat within a small area, requiring an appropriate path from the transistor structure through the package and into the surrounding assembly.
Thermal design is particularly important in portable communications equipment. The amplifier may need to operate for extended periods inside an enclosure with limited airflow, while its operating temperature affects electrical performance and potentially the reliability of the completed system.
CML has incorporated nominal 50Ω matching at the RF input and output, together with integrated DC blocking capacitors. These arrangements reduce some of the external circuitry normally needed to interface an amplifier with a conventional RF signal chain.
Impedance matching is necessary because reflections can occur when a high-frequency signal encounters a change in the electrical characteristics of its transmission path. Such reflections reduce the efficient transfer of RF energy and can affect amplifier performance. Integrated matching helps establish suitable interface conditions, although the PCB layout and external connections remain important.
The device’s published characteristics include a DC bias figure of 56mA at a 28V supply. This is a specified bias condition and should not be confused with the total current drawn while producing 10W of RF output power. Current consumption increases with the operating point and depends on the applied input signal.
The 55% power-added efficiency figure also applies at a defined measurement condition. Power-added efficiency compares the additional RF power produced by an amplifier with the electrical power it consumes, accounting for the RF power supplied at its input. It varies with frequency, drive level, temperature, and the operating configuration.
CML has identified mobile ad hoc network radios as one of the principal applications. In a MANET arrangement, radio nodes can form and maintain connections without relying exclusively on fixed telecommunications infrastructure, potentially relaying information through other participating devices.
These systems are used where equipment must communicate while moving or operating in locations without an established network. The radio hardware must provide the necessary transmission range while remaining within constraints on electrical power, mechanical size, and heat generation.
A compact RF amplifier can help with the design of the transmitter output stage, although achievable link range depends on many other factors. Antenna performance, receiver sensitivity, propagation conditions, interference, modulation, and available transmission bandwidth all contribute to the operation of the communications system.
Uncrewed aircraft provide another potential application. Data links may carry navigation commands, telemetry, or sensor information, with the RF output stage required to deliver the specified signal power under changing operating conditions.
Aerospace and defence equipment may also have requirements for environmental testing, electromagnetic compatibility, and component traceability. The launch does not establish that every finished system using the MGX-445040-S5 will meet a particular defence or aviation qualification standard.
CML identifies the amplifier as suitable for use as a high-power driver in 5G New Radio band n79 infrastructure. This provides a potential commercial communications application alongside the defence-oriented programmes emphasised in the launch.
The company has expanded its compound semiconductor capabilities in recent years, including through its acquisition of MwT. The new component extends that expertise into a packaged GaN amplifier intended for compact, higher-power communications designs.
The MGX-445040-S5 became available on 18 November 2026 in tape-and-reel packaging. An evaluation board, the MGX-445040-S5EV, is also available to support electrical testing and integration work.
The component provides a defined combination of frequency coverage, saturated output power, gain, and package dimensions. Its performance in production equipment will depend on the completed RF design, operating conditions, and qualification requirements of the intended application.


