IN Brief:
- The Global Electronics Association warns of shortages affecting PCB materials and manufacturing capacity across several industrial sectors.
- Year-to-date bookings increased 56.1% through September, compared with shipment growth of 13.3%, while some high-layer-count board lead times reached 16–20 weeks or longer.
- The organisation forecasts shortages through at least the first half of 2027, with meaningful relief unlikely before mid-2028.
The Global Electronics Association has warned that shortages of printed circuit boards and their manufacturing materials could disrupt electronics production through 2027 and beyond, with AI infrastructure demand placing increasing pressure on already constrained manufacturing capacity. The organisation expects meaningful relief to remain unlikely before mid-2028.
Automotive, industrial, medical, defence, and telecommunications manufacturers are reporting longer lead times and difficulties securing sufficient PCB supplies. The pressure is affecting completed circuit boards and the materials required to manufacture them, creating a series of connected constraints across the electronics production chain.
Among the materials identified are electronic glass fabric, resin, copper foil, and laminate. These form essential parts of multilayer PCB construction, and shortages in one area can restrict output even where additional fabrication equipment and factory space are available.
Demand from AI computing infrastructure has increased the quantities of material required by advanced boards. The association estimates that a typical PCB contains approximately 12 layers, while boards intended for AI servers are moving towards 40–60 layers or more.
Increasing the number of layers allows complex electronic systems to accommodate additional signal routing, power distribution, and reference planes. High-density computing hardware also requires careful management of signal integrity as data moves between processors, memory, networking components, and other devices.
The manufacturing process becomes more demanding as board complexity increases. Multilayer construction involves preparing copper circuitry, aligning successive layers, incorporating insulating materials, and applying heat and pressure during lamination. Further operations establish electrical connections between layers and form the external connections required by the final assembly.
Each additional layer increases material consumption, while demanding stack designs can create further requirements for dimensional stability and process control. Manufacturing yield and throughput therefore depend on both material availability and the ability to maintain the required production tolerances.
Advanced computing boards may also depend on specialised laminate systems with electrical characteristics suited to high-speed signals. Substituting another material is not necessarily straightforward because dielectric properties, thermal expansion, processing behaviour, and other characteristics can affect the electrical and mechanical performance of the finished board.
The supply imbalance is reflected in the association’s North American industry statistics. PCB bookings increased by 56.1% in the year to September 2026, while shipments grew by 13.3% over the corresponding period. These are year-to-date changes, rather than growth figures for September alone.
The substantial difference between incoming orders and completed shipments indicates pressure on production capacity. It does not establish that every order will translate directly into final demand, since customers may bring purchases forward or increase their order coverage when supply becomes uncertain.
Lead times for high-layer-count boards have reached 16–20 weeks or longer, according to the association. The consequences extend beyond the PCB supplier because an electronic assembly cannot be completed without the board on which its components are mounted.
This creates particular difficulties for manufacturers working with long qualification cycles. Medical devices, safety-critical industrial controls, and aerospace electronics may require approved materials, qualified factories, and documented manufacturing processes. Transferring a design to an alternative supplier can involve substantial testing and engineering work.
Production capacity is also concentrated geographically. The association estimates that Asia manufactures more than 90% of the world’s printed circuit boards, leaving North American and European equipment producers dependent on international supply arrangements for much of their demand.
Europe’s position has weakened over the longer term. Its share of global PCB production declined from 13.8% in 2000 to 2.2% in 2023, according to figures cited by the organisation. This limits the region’s ability to respond to shortages through domestic production alone.
Investment in additional factories has continued. Industry estimates cited by the association indicate that at least $10 billion has been invested in new PCB facilities in Southeast Asia during the past three years, alongside at least an equivalent amount in China.
New manufacturing lines will not immediately resolve shortages of glass fabric, copper foil, resin, or other inputs. A factory that cannot secure adequate materials may be unable to operate at its intended output, regardless of its installed fabrication capacity.
The Global Electronics Association expects the shortage to continue through at least the first half of 2027. Its assessment is that meaningful relief is unlikely before mid-2028, reflecting the time needed to expand both board fabrication and the associated material supply chain.
Those dates are industry projections rather than confirmed delivery schedules. Demand may change, new capacity may become available, and purchasing behaviour could alter the balance between orders and output.
The association is encouraging manufacturers to improve demand forecasts, avoid placing duplicate orders, and qualify alternative suppliers or materials where possible. These measures can improve allocation and visibility, although they cannot independently increase the quantities of material available.
Its recommendations to governments include extending relevant semiconductor manufacturing incentives to advanced PCB fabrication, supporting research into alternative materials, accelerating permits for new facilities, and monitoring lead times across the supply chain.
The organisation also proposes measures to prioritise critical programmes in sectors including defence, aerospace, medical equipment, and essential infrastructure. Such arrangements would need to balance continuity of supply for critical systems against the competing requirements of other electronics manufacturers.
The association considers the current disruption potentially comparable with the semiconductor supply shortages of 2021. That assessment remains a forecast of possible severity, but the measured gap between bookings and shipments, extended lead times, and material constraints identify a supply imbalance extending well beyond individual PCB factories.


