Bel Fuse extends 10GbE copper transceiver reach

Bel Fuse extends 10GbE copper transceiver reach

Bel Fuse has introduced a longer-reach copper Ethernet transceiver module. Its new SFP+ device supports 10GBASE-T connections up to 100 metres, with the manufacturer reporting 35% lower power consumption than the previous generation.


IN Brief:

  • Bel Fuse has introduced the TRP 2250895-1 SFP+ transceiver, supporting 10GBASE-T transmission over distances up to 100 metres.
  • The new module consumes 1.3–1.5W, compared with 2.3–2.5W for its predecessor, according to Bel.
  • Multiple Ethernet speeds, thermal monitoring, and cable diagnostics support integration into compatible networking equipment.

Bel Fuse has introduced a copper SFP+ Ethernet transceiver supporting 10GBASE-T transmission over distances of up to 100 metres, extending the reach of its previous-generation module while reducing power consumption. The new TRP 2250895-1 incorporates Marvell’s MV-CUX3610 physical-layer device and supports several Ethernet speeds for applications using existing copper networking infrastructure.

The new module extends 10GBASE-T reach from the 30 metres supported by Bel’s earlier design to 100 metres under suitable cabling conditions. Bel also reports a 35% reduction in power consumption compared with the preceding generation, providing additional scope for its use in densely populated network equipment.

Power consumption for the 2250895-1 is specified between 1.3W and 1.5W, compared with 2.3W to 2.5W for the previous module. These are manufacturer figures, and the actual consumption will depend on the transceiver’s operating conditions and link configuration.

The SFP+ format provides a modular interface for connecting networking hardware to different transmission media. Copper transceivers incorporate the electrical circuitry required to interface the host equipment with twisted-pair Ethernet cabling, allowing a suitable SFP+ port to support conventional copper network connections.

Bel’s new device uses Marvell’s MV-CUX3610 PHY to perform the physical-layer functions required for multi-gigabit Ethernet transmission. The PHY manages the electrical signalling associated with transmitting and receiving data, including the signal processing necessary to maintain reliable communication over a copper connection.

The electrical characteristics of twisted-pair cable become increasingly demanding at higher data rates and longer distances. Signal attenuation, interference between conductors, and other effects can reduce the margin available for accurately recovering transmitted information.

Physical-layer processing compensates for these effects within the operating limits of the selected Ethernet standard and cable installation. Extending 10GbE to 100 metres therefore requires more than a mechanical change to the transceiver; it depends on the capabilities of the PHY and the characteristics of the complete link.

The 100-metre 10GBASE-T capability requires suitable Category 6A or better cabling. The advertised reach should not be interpreted as a guarantee that every existing copper installation will support 10Gbps over that distance.

Cable quality, installation practice, connector condition, and the electrical environment can affect performance. Existing cabling may require qualification before being used at higher transmission speeds, particularly where the installation was originally designed for a lower Ethernet data rate.

The new transceiver supports 10GBASE-T, 5GBASE-T, 2.5GBASE-T, 1000BASE-T, and 100BASE-T operation. This allows the same module design to accommodate several generations of networking equipment and different link requirements.

Multi-speed capability is relevant to installations containing a mixture of devices. Industrial systems and network infrastructure can include controllers, computing equipment, storage systems, and other devices whose Ethernet interfaces operate at different speeds.

Supporting several speeds through one transceiver reduces the need to select entirely different hardware for each connection. However, successful operation still depends on compatibility between the transceiver, host equipment, connected device, and cabling.

The SFP+ module is hot-pluggable, allowing it to be inserted or removed through a compatible port without requiring permanent mechanical attachment. This can simplify equipment servicing and configuration changes, subject to the operating procedures supported by the host platform.

Bel specifies compliance with IEEE 802.3an, 802.3bz, 802.3ab, and 802.3u Ethernet requirements, alongside SFF-8431 and SFF-8432 MSA interface specifications. These provide the standards framework for the supported transmission modes and physical interface.

The module also incorporates cable diagnostics and a thermal monitoring function. Its on-die temperature sensor provides alarm and warning thresholds, allowing the device to identify operating conditions associated with excessive temperature.

Thermal behaviour becomes important when multiple transceivers are installed close together. Each device dissipates heat inside the networking equipment, while the available airflow and mechanical arrangement determine how effectively that heat can be removed.

Reducing electrical power consumption can help limit the heat generated by individual modules. The benefit across an entire switch or networking platform will depend on the number of transceivers installed, their operating conditions, and the contribution of other components to the equipment’s total power consumption.

Bel specifies a commercial case operating temperature range of 0°C to 70°C for both the new transceiver and its predecessor. The latest module should therefore not be treated as an extended-temperature industrial device without additional qualification.

The temperature rating is particularly relevant where equipment operates in unconditioned industrial environments or outdoor enclosures. Such installations may require alternative transceiver specifications or additional thermal controls if temperatures fall outside the stated range.

Bel positions the new device as an alternative to replacing suitable copper installations with fibre-optic connections. The choice between copper and fibre nevertheless depends on transmission distance, electromagnetic conditions, equipment interfaces, installation costs, and other application requirements.

The 2250895-1 expands the company’s TRP networking component portfolio with a longer-reach 10GbE option and lower stated power consumption. Equipment designers and network operators will need to verify host compatibility, cabling, and operating conditions before using the module across the full advertised distance.


Stories for you


  • Bel Fuse extends 10GbE copper transceiver reach

    Bel Fuse extends 10GbE copper transceiver reach

    Bel Fuse has introduced a longer-reach copper Ethernet transceiver module. Its new SFP+ device supports 10GBASE-T connections up to 100 metres, with the manufacturer reporting 35% lower power consumption than the previous generation.


  • JEDEC outlines next-generation DDR6 memory architecture

    JEDEC outlines next-generation DDR6 memory architecture

    JEDEC has outlined preliminary specifications for its proposed DDR6 standard. The architecture targets higher memory transfer rates, a wider data interface, increased device density, and revised channel organisation for future computing systems.