IN Brief:
- Luceda has added a Tower Semiconductor-endorsed Irys DRC deck for the PH18 silicon photonics process.
- The deck checks geometry, spacing, connectivity, and density while photonic layouts are being implemented.
- Availability is confirmed for Irys DRC users on PH18; no quantified reductions in design iterations have been published.
Luceda Photonics has made a foundry-endorsed design rule check deck available for Tower Semiconductor’s PH18 silicon photonics platform, bringing physical layout verification into the same environment used to develop photonic integrated circuits. The Belgian design software company has integrated the new rule deck with its existing process design kit for PH18, using its Irys DRC verification software.
The rule deck allows physical checks during layout implementation, when waveguides and electrical interconnects can still be adjusted without reopening a completed design. Luceda has not published a measured reduction in tape-out time, respins, or engineering costs. Its stated benefit is earlier identification of violations that would otherwise emerge during late-stage verification.
Photonic circuit simulation and foundry rule checking address different questions. A circuit can satisfy a model of its intended optical behaviour but still contain waveguide bends, gaps, layer combinations, or electrical geometries that fail the selected manufacturing process’s constraints. Spacing, density, and connectivity requirements therefore have to be checked alongside the optical design, particularly when electronic and photonic features share the same die.
Those checks become more difficult as a photonic circuit incorporates additional waveguides, couplers, modulators, detectors, and electrical connections within a restricted die area. Optical routing and electrical integration create different constraints, while small changes in layout can require neighbouring structures to be rechecked. A violation found near the end of a design can force revisions to several connected elements rather than a single isolated feature.
Luceda’s PH18 deck checks geometric constraints, spacing, connectivity, and density against the rules endorsed by Tower Semiconductor. By placing those checks within the layout implementation flow, Irys DRC can identify violations while the relevant geometry is still being edited. The company expects this approach to reduce the number of iterations needed between designers and the foundry’s engineering team before tape-out.
Because manufacturing rules are process-specific, endorsement by Tower Semiconductor is a substantive part of the integration. The deck must reflect the dimensions, permitted layer combinations, and other constraints for the PH18 process; passing a generic geometry checker would not establish conformity with Tower’s requirements. Luceda’s implementation gives PH18 users an endorsed route to run those checks inside their usual layout environment.
Luceda has embedded the deck in its process design kit rather than offering it as a detached checking exercise. A process design kit provides the technology-specific building blocks and information used to implement a chip layout. Integrating verification with those resources makes it possible to test the evolving geometry against the same process assumptions used during design. It does not remove the need for optical simulation, circuit validation, or final foundry acceptance.
Chiara Alessandri, Product Manager at Luceda Photonics, said the company wanted compliance checks to become part of routine layout work rather than a final hurdle. Samir Chaudhry, Vice President of Design Enablement and Reliability at Tower Semiconductor, said identifying violations earlier could reduce quality-assurance iterations with the foundry’s engineers. Neither company published test data showing how many iterations the new deck removes from a completed design.
The additional checking capability sits alongside other work to connect photonic design tools with foundry processes. Keysight’s recent integration with Tower technology concerned a different design-software flow. Luceda’s development is specifically a foundry-endorsed physical design rule deck embedded in the PH18 process design kit.
A layout that passes a geometric design-rule check has not thereby demonstrated insertion loss, optical bandwidth, thermal stability, or production yield. Those characteristics still depend on circuit architecture, material and process variation, device characterisation, and appropriate electrical and optical testing. The new deck addresses a defined manufacturing constraint: whether a photonic layout conforms to the PH18 foundry rules.
The PH18 deck is available to Irys DRC users now. Those using the platform can incorporate physical compliance checks into layout iterations before sending a design to the foundry, while optical and electrical simulation, final checks, and fabrication qualification remain separate steps.



